化工学报2016，Vol.67Issue(3)：736-742,7.DOI:10.11949/j.issn.0438-1157.20151932
塔式太阳能电站接收器的建模及动态仿真
Modeling and dynamic simulation of receiver in a solar tower power station
摘要
Abstract
The receiver is an important part for photothermal conversion in the solar tower power station. Thus, modeling and simulation of the receiver is extremely significant for the safety and steady-operation of the plant. The sectional lumped parameter model of the molten salt receiver, whose prototype is Solar Two located in USA, is established by the space discretization of the heat tubes according to the law of conservation of energy and mass. The validity of the model is verified through the comparisons between the test results of the receiver in Solar Two plant and the simulation results. The heat transfer characteristics of the receiver in the cases where the inputs change and the received energy distribution isn’t uniform are analyzed by the transient simulation, which can provide the foundation for the investigation of the aiming points strategy and safe operation of the station.关键词
太阳能/接收器/分段集总参数模型/动态建模/动态仿真Key words
solar energy/receiver/sectional lumped parameter model/dynamic modeling/dynamic simulation分类
能源科技引用本文复制引用
盛玲霞,李佳燕,赵豫红..塔式太阳能电站接收器的建模及动态仿真[J].化工学报,2016,67(3):736-742,7.基金项目
国家自然科学基金项目（61173128）；国家重点基础研究发展计划项目(2012CB720500)。@@@@supported by the National Natural Science Foundation of China (61173128), and the National Basic Research Program of China (2012CB720500) （2012CB720500）
