| 注册
首页|期刊导航|烟草科技|滤嘴对卷烟物理保润性能的影响

滤嘴对卷烟物理保润性能的影响

马骥 崔凯 陈芝飞 孙志涛 芦昶彤 马宇平 赵明月 洪广峰

烟草科技2016,Vol.49Issue(3):68-76,9.
烟草科技2016,Vol.49Issue(3):68-76,9.DOI:10.16135/j.issn1002-0861.20160310

滤嘴对卷烟物理保润性能的影响

Effects of filter on physical retention of moisture in cigarette

马骥 1崔凯 1陈芝飞 2孙志涛 2芦昶彤 2马宇平 2赵明月 1洪广峰1

作者信息

  • 1. 中国烟草总公司郑州烟草研究院,郑州高新技术产业开发区枫杨街2号 450001
  • 2. 河南中烟工业有限责任公司技术中心,郑州市陇海东路72号 450000
  • 折叠

摘要

Abstract

In order to investigate the effects of cigarette filter on the physical retention of moisture in cigarette, the isothermal moisture adsorption and moisture loss of the whole cigarette, tobacco rod and filter segment were separately studied. The differences in water activity between cigarette, tobacco rod and filter at the early stage of water loss, as well as their dehydration rates, were measured and analyzed from 21 cigarette samples of different specifications. The results showed that: there were significant differences between tobacco rods and filter segments regarding isothermal moisture adsorption and moisture loss. At the early stage of moisture loss of cigarette, the internal moisture migrated from the tobacco rod towards the filter segment, causing rapid moisture loss of the tobacco rod. This resulted in accelerated moisture loss and the reduction of moisture retention by the whole cigarette. The moisture loss rates of 21 cigarette samples were higher than those of their corresponding tobacco rods by 28.6% on average. These results indicated that improving the cigarette filter’s physical retention of moisture and reducing the moisture migration from tobacco rod towards filter were beneficial to the promotion of physical retention of moisture in cigarette.

关键词

卷烟/滤嘴/物理保润性能/水分迁移

Key words

Cigarette/Filter/Physical retention of moisture/Moisture migration

分类

轻工纺织

引用本文复制引用

马骥,崔凯,陈芝飞,孙志涛,芦昶彤,马宇平,赵明月,洪广峰..滤嘴对卷烟物理保润性能的影响[J].烟草科技,2016,49(3):68-76,9.

基金项目

国家烟草专卖局资助项目“国内外卷烟物理保润性能比较与剖析”[110201201010(BR-04)]。 ()

烟草科技

OA北大核心CSCDCSTPCD

1002-0861

访问量3
|
下载量0
段落导航相关论文