XLPE电缆局放信号传播特性仿真研究OA
Simulation Study on the Propagation Characteristics of the Partial Discharge Signals in XLPE Cable
局放信号在电缆中的传播规律,是识别、提取、定位局放信号的关键问题。本文对XLPE电缆中局放信号的传播特性进行了仿真分析,通过改变电缆长度、电缆参数、局放信号的上升沿以及局放信号的频率,进行了四组仿真研究,对比分析了局放信号在电缆中的传播特征:局放信号在电缆中传播时,将会出现延时现象以及幅值的衰减,并且随着电缆长度的增加,延迟的时间以及幅值的衰减程度都会增大。本文不考虑电晕等干扰因素的影响,因此改变电缆长度、电缆参数等对局放信号的上升时间与脉冲宽度影响不大。
The propagation characteristics of partial discharge in the cable are the key problems to identify, extract and locate the partial discharge. The simulation of the partial discharge propaga⁃tion characteristics in XLPE cable is carried out in this paper. By changing the length of the cable, cable parameters, the rising edge and frequency of the partial discharge, four groups of simulation research was carried out. The result of contrastive analysis of the pr…查看全部>>
汪迪锋;孔海洋;吴磊;李文娟
广东电网有限责任公司江门供电局,广东 江门 529300武汉大学电气工程学院,湖北 武汉 430072中国长江电力股份有限公司溪洛渡水力发电厂,云南 昭通 657300武汉大学电气工程学院,湖北 武汉 430072
动力与电气工程
XLPE电缆局部放电传播特性MATLAB/Simulink
XLPE cablepartial dischargepropagation characteristicsMATLAB/Simulink
《湖北电力》 2016 (1)
53-57,62,6
评论