| 注册
首页|期刊导航|燃料化学学报|K/MgFeZn-HTLcs催化CO加氢制低碳烯烃性能研究

K/MgFeZn-HTLcs催化CO加氢制低碳烯烃性能研究

马丽萍 张建利 马清祥 范素兵 赵天生

燃料化学学报2016,Vol.44Issue(4):449-456,8.
燃料化学学报2016,Vol.44Issue(4):449-456,8.

K/MgFeZn-HTLcs催化CO加氢制低碳烯烃性能研究

Direct synthesis of light olefins from CO hydrogenation over K/MgFeZn-HTLcs catalysts

马丽萍 1张建利 1马清祥 1范素兵 1赵天生1

作者信息

  • 1. 宁夏大学化学化工学院 省部共建天然气转化国家重点实验室培育基地,宁夏 银川 750021
  • 折叠

摘要

Abstract

A series of K promoted K/MgFeZn-HTLcs catalysts with different Mg/Fe/Zn molar ratios were prepared by means of precipitation method and impregnation method for the direct synthesis of light olefins from CO hydrogenation. The samples were characterized by N2 adsorption-desorption SEM, TG, XRD, XPS and H2-TPR measurements. The results showed that the MgFeZn-HTLcs catalyst precursors have typical lamellar structure, larger specific surface area and average pore diameter compared with Fe/Zn catalyst. The BET surface area and the average pore diameter decreased after calcination and K promotion. The bulk composition of the calcined samples was mainly metal oxide and ferrite. Fe5 C2 , MgCO3 and ZnO were formed in K/MgFeZn-HTLcs catalysts after reaction. However, the main phase in K/2Fe-1Zn catalyst was stabilized in ZnFe2 O4 . During CO hydrogenation, the prepared samples showed high C=2-4 selectivity and low C+5 weight fraction compared with that of K/2Fe-1Zn sample. The product distribution was greatly improved. Over the sample K/2Mg-2Fe-1Zn, an olefin to paraffin ratio of 5. 15 and the C=2-4 weight olefin content of 48. 56% could be obtained.

关键词

费托合成/K/MgFeZn-HTLcs催化剂/CO加氢/低碳烯烃

Key words

Fischer-Tropsch synthesis/K/MgFeZn-HTLcs catalyst/CO hydrogenation/light olefins

分类

化学化工

引用本文复制引用

马丽萍,张建利,马清祥,范素兵,赵天生..K/MgFeZn-HTLcs催化CO加氢制低碳烯烃性能研究[J].燃料化学学报,2016,44(4):449-456,8.

基金项目

The project was supported by Ningxia Natural Science Foundation of China (NZ13010).@@@@宁夏自然科学基金(NZ13010)资助 (NZ13010)

燃料化学学报

OA北大核心CSCDCSTPCD

2097-213X

访问量0
|
下载量0
段落导航相关论文