人民黄河2016，Vol.38Issue(3)：68-71,4.DOI:10.3969/j.issn.1000-1379.2016.03.019
短流程浸没式超滤膜工艺的膜污染控制研究
Membrane Pollution Control Research on Short Flow Ultrafiltration Process for Water Treatment
摘要
Abstract
In order to determine the optimal operating conditions and cleaning parameters, the pilot test about the influence of operation conditions on ultrafiltration membrane pollution effects in the Yellow River water treatment was operated. According to the water quality characteristics, the influence of operating conditions on membrane fouling control was carried out by observing the changes of TMP, such as the amount of coagulant dosing, membrane flux, blowing period and membrane cleaning, etc. The tests show that the optimal operating conditions for the slowest membrane pollution rate is that the best dosage is 6 mg/L, the best flux range is 30-40 L/( h·m2 ) and the best blowing period is 5 hours at a time; meanwhile, in order to restore the normal flux, membrane cleaning must be conducted. A physical cleaning is required every 60 minutes while a maintenance cleaning is 7 days a time. When physical and maintenance membrane cleaning is difficult to restore the original processing capacity, a chemical cleaning is needed to remove irreversible pollution on the membrane surface.关键词
超滤/膜污染速率/膜通量/排污周期/膜清洗Key words
ultrafiltration/membrane pollution rate/membrane flux/blowing period/membrane cleaning分类
建筑与水利引用本文复制引用
张小燕,王刚,崔俊蕊,刘俊良..短流程浸没式超滤膜工艺的膜污染控制研究[J].人民黄河,2016,38(3):68-71,4.基金项目
2013年石家庄市科学技术研究与发展计划项目（131240213A）；2014年河北省建工新产品试制费计划项目（2014－121）。 （）
