口腔疾病防治2016，Vol.24Issue(5)：283-287,5.DOI:10.12016/j.issn.2096-1456.2016.05.005
基于micro-CT成像的仿真牙周膜有限元建模探讨
Study on the three-dimensional finite element simulation model of periodontal membrane based on micro-CT im-aging
王洪宁 1秦行林 1刘东旭 2李文娟 3王霄立1
作者信息
- 1. 烟台市口腔医院烟大门诊部，山东 烟台 264001
- 2. 山东大学口腔医学院
- 3. 山东大学土建与水利学院
- 折叠
摘要
Abstract
Objective To establish the three-dimensional finite element simulation model of periodontal membrane by micro-CT scanning data. Methods A human maxillary jaw segment containing central incisor was scanned with micro-CT for section images, which were managed with Mimics software to form a geometric model. The model was imported to remesh module for optimization and then the three-dimentional finite element model was constructed by Ansys. Results The three-dimensional finite element models encompassing 12 936 nodes and 6 400 tetrahedral element, which highly re-semble the structure of periodontal ligament. Tooth ( 60 872 nodes and 42 144 tetrahedral element) and alveolar bone models ( 41 472 nodes and 32 339 tetrahedral element) were constructed successfully. Conclusion The three-dimen-sional finite element simulation model of periodontal membrane can be established by micro-CT combined with Mimics and Ansys software. After adding the corresponding tooth alveolar bone, it can be further used in orthodontic biomechanics analysis.关键词
Micro-CT/牙周膜/三维有限元/Mimics/应力Key words
Micro-CT/Periodontal ligament/Three-dimensional finite element/Mimics/Stress分类
医药卫生引用本文复制引用
王洪宁,秦行林,刘东旭,李文娟,王霄立..基于micro-CT成像的仿真牙周膜有限元建模探讨[J].口腔疾病防治,2016,24(5):283-287,5.
