化工进展2016，Vol.35Issue(5)：1326-1331,6.DOI:10.16085/j.issn.1000-6613.2016.05.010
PV/T集热器优化设计及实验
Optimization design and experimental study on collector of photovoltaic/thermal
梁子伟 1简林桦 1闫金州 1关欣1
作者信息
- 1. 上海理工大学能源与动力工程学院，上海 200093
- 折叠
摘要
Abstract
The photovoltaic/thermal(PV/T) collector is a critical component of the photovoltaic thermal system. Performance quality directly decides high or low of comprehensive utilization of solar energy. Therefore,the design of the PV/T collector has an important role on research in the performance of the photovoltaic solar-thermal system. In this paper,the analysis structure and heat resistance of the PV/T collector,simulation of the thermal performance of the PV/T collector in aluminum tube plate under 75 kinds of working conditions,including irradiance types,structure size and flow conditions by using the Fluent software,and optimal design for the PV/T collector,according to the result of design to build the test rig,the collection efficiency and power efficiency of PV/T collector were studied. The results showed that the better cooling water flow rate(Q=0.008kg/s) and area ratio(D/W=0.4) of the collector were obtained. With the increase of the normalized temperature difference,the photoelectric efficiency and the collection efficiency of PV/T collector decreased. The maximum error of the predicted values and experimental values of the photoelectric efficiency was 22.5 percent. The average collection efficiency is 0.63. The county thermal efficiency reaches 0.75.关键词
PV/T集热器/热阻分析/数值模拟/光电效率/集热效率/优化设计/传热Key words
photovoltaic/thermal collector(PV/T)/thermal resistance analysis/numerical simulation/photoelectric efficiency/collection efficiency/optimal design/heat transfer分类
能源科技引用本文复制引用
梁子伟,简林桦,闫金州,关欣..PV/T集热器优化设计及实验[J].化工进展,2016,35(5):1326-1331,6.
