金刚石与磨料磨具工程2016，Vol.36Issue(2)：10-14,5.DOI:10.13394/j.cnki.jgszz.2016.2.0003
镍基高温合金孔珩磨余量对加工质量的影响
Effect of machining allowance on machining quality in honing nickel-base superalloy
摘要
Abstract
For typical difficult-to-machine materials of nickel-base superalloy GH41 69, honing experiments are carried out to study the hole surface roughness and cylindricity.Results show that the surface roughness decreases gradually and tends to be stable as honing continues when honing GH41 69 using metal bonded CBN oilstone.The best surface roughness is R a 0.7 μm when using the grit size 100μm oilstone,R a 0.3 μm using 34 μm oilstone and R a 0.1 μm using 8 μm oilstone.Based on the results, two prediction models,namely the minimum bottom hole machining allowance prediction model and the maximum allowable deviation of cylindricity prediction model,are established and verified by relevant experiments.It turns out that the errors of the models are less than 10%.关键词
GH4169/珩磨/加工余量/圆柱度Key words
GH41 69/honing/machining allowance/cylindricity分类
矿业与冶金引用本文复制引用
董洪亮,杨长勇,高绍武,傅玉灿,周晓卫,刘忠..镍基高温合金孔珩磨余量对加工质量的影响[J].金刚石与磨料磨具工程,2016,36(2):10-14,5.基金项目
国家自然科学基金(51305200) （51305200）
江苏省自然科学基金(BK20130805) （BK20130805）
江苏省科技支撑计划(BE2013122) （BE2013122）
先进数控技术江苏省高校重点试验室开放基金(KXJ201502)。 （KXJ201502）
