电工技术学报2016，Vol.31Issue(10)：102-111,10.
染污硅橡胶在不同憎水性时的污闪特性
Flashover Characteristic of Polluted Silicone Rubber with Different Hydrophobicity
摘要
Abstract
This paper introduces the flashover characteristics of polluted silicone rubber plate samples with different hydrophobic properties. By virtue of quantitative brushing method, samples were polluted by controlling hydophobicity transfer time to obtain different hydrophobic properties . The maximum value of droplet area on the pollution layer stood for the state of surface hydrophobicity. The impacts of hydrophobicity on flashover voltage, pollution resistance and the development of arc were studied. Test results show that flashover voltages of samples increase with the improvement of surface hydrophobicity. A correlation exists between flashover voltage and the maximum value of droplet area. However, deviation increases from hydrophilic state to hydrophobic state. The morphology of droplets has a great effect on arc development. When drops form continuous water film, the number of arc paths is limited and the value of flashover voltage is low. However, when the drops on the surface are spherical and scattered, discharge areas are scattered s and the flashover voltages are high. According to the results of flashover tests and the different patterns of droplets, hydrophilic surface HC7, is subdivided into HC7A, HC7B, HC7C and HC7D respectively. Despite very unobvious hydrophobicity of HC7B, flashover voltages of samples with HC7B are obviously higher than those with totally hydrophilic states, such as HC7C and HC7D. Therefore, if the configuration structure is designed according to the flashover voltage related to the HC7B state, structure height of composite insulators can be shortened with the ensured safety.关键词
硅橡胶绝缘子/憎水性/污闪/液滴面积/电弧Key words
Silicone rubber insulator/hydrophobicity/pollution flashover/droplet area/electric arc分类
信息技术与安全科学引用本文复制引用
戴罕奇,赵晨龙,梁建瑜,周军,王黎明..染污硅橡胶在不同憎水性时的污闪特性[J].电工技术学报,2016,31(10):102-111,10.基金项目
国家自然科学基金资助项目(51377093). （51377093）
