天津工业大学学报2016，Vol.35Issue(3)：84-88,5.DOI:10.3969/j.issn.1671-024x.2016.03.016
碳纤维立体织机打纬机构运动特性仿真
Kinematics simulation in carbon fiber multilayer loombeating-up mechanism
摘要
Abstract
Aiming at the disadvantages of the existing carbon fiber three-dimensional loom beating-up mechanism of beating up force being insufficient, the vector method is proposed, and using different input signals of heart type and offset slipscrank beating up mechanism kinematic analysis of simulation under Simulink environment, the motion curve under the two conditions of the slider are obtained. The experimental results show that when the crank input state for uniform angular velocity, slipscrank beating up mechanism can meet the desired motion of the loom, compared to the heart of mechanism, can also meet the requirements of loom beating up force.关键词
碳纤维/立体织机/打纬机构/矢量法Key words
carbon fiber/multilayer woven/beating up mechanism/vector method分类
轻工纺织引用本文复制引用
杨建成,姜海涛,蒋秀明..碳纤维立体织机打纬机构运动特性仿真[J].天津工业大学学报,2016,35(3):84-88,5.基金项目
国家十二五科技支撑项目“碳纤维多层角联机织造装备及技术研发” （）
