工程科学学报2016，Vol.38Issue(1)：128-134,7.DOI:10.13374/j.issn2095-9389.2016.01.017
基于H型钢残余应力主动控制的矫直工艺设计
Process design based on active residual stress control of H-beams during a straightening process
摘要
Abstract
Aiming at the active residual stress control of H-beams during a roller straightening process,an analysis model of stress evolution during the straightening process is constructed based on the elastic-plastic theory.A numerical solution method to quickly deal with the analysis model is investigated by discrete analysis.Then,an active design method of process parameters that can realize active residual stress control is established according to the analysis model.By using this method,process parameters are designed for typical specification H-beam straightening.Calculated results using the analysis model match those by a finite element method well and the analysis model makes the computational cost saved.The analysis model can achieve the result analysis of residual stress evolution within the feasible region in limited time.The process design method can get the process parameters of active control under specific target parameters and constraint conditions.关键词
H型钢/矫直/残余应力/主动控制/工艺设计Key words
H-beams/straightening/residual stress/active control/process design分类
矿业与冶金引用本文复制引用
管奔,臧勇,秦勤,吴迪平,张超..基于H型钢残余应力主动控制的矫直工艺设计[J].工程科学学报,2016,38(1):128-134,7.基金项目
北京市自然科学基金资助项目(3154036) （3154036）
国家高技术研究发展计划(863)资助项目(2013AA031302) （863）
中央高校基本科研业务费(FRF-TP-15-022A2) （FRF-TP-15-022A2）
