烟草科技2016，Vol.49Issue(5)：90-93,4.DOI:10.16135/j.issn1002-0861.20160513
PROTOS70卷接机组烟梗打散型漂浮室的设计
Design of winnowing chamber with tobacco loosening unit in PROTOS70 cigarette maker
摘要
Abstract
In order to improve the separation efficiency of the secondary winnowing chamber in PROTOS70 cigarette maker, a winnowing chamber with a zigzag air passage was configured. A tobacco loosening unit was installed above the chamber to loosen tangled or stuck stems and shreds until they were completely separated. The application results showed that: 1) The shred content in rejected stems decreased from 5.02% to 3.48%. 2) The defective cigarettes with a hole punctured by sliver reduced by 27% in cigarette appearance inspection. Winnowing chamber with tobacco loosening unit effectively promoted the separation efficiency and further the appearance quality of cigarette.关键词
PROTOS70卷接机组/烟梗打散/漂浮室/梗中含丝量/烟支外观Key words
PROTOS70 cigarette maker/Tobacco stem loosening/Winnowing chamber/Tobacco shred content in stem/Cigarette appearance分类
轻工纺织引用本文复制引用
刘澜波,韩艳军,陈恩,周学东..PROTOS70卷接机组烟梗打散型漂浮室的设计[J].烟草科技,2016,49(5):90-93,4.基金项目
湖南中烟有限责任公司科技项目“卷接工序停机不供盘纸及PROTOS70漂浮室改进”(KY2015CX0009)。 （KY2015CX0009）
