| 注册
首页|期刊导航|原子能科学技术|熔融物液柱碎化模型对先进压水堆堆外蒸汽爆炸计算的影响分析

熔融物液柱碎化模型对先进压水堆堆外蒸汽爆炸计算的影响分析

陈巧艳 王辉 石雪垚

原子能科学技术2016,Vol.50Issue(5):812-818,7.
原子能科学技术2016,Vol.50Issue(5):812-818,7.DOI:10.7538/yzk.2016.50.05.0812

熔融物液柱碎化模型对先进压水堆堆外蒸汽爆炸计算的影响分析

Effect of Corium Jet Fragmentation Model on Ex-vessel Steam Explosion Calculation for Advanced PWR

陈巧艳 1王辉 1石雪垚1

作者信息

  • 1. 中国核电工程有限公司,北京 100840
  • 折叠

摘要

Abstract

In the ex-vessel steam explosion calculation , the corium jet fragmentation model affects the premixing parameters and phenomena such as generation rate and size of corium drops , the distribution of corium drops , corium drop solidification , void fraction and so on ,and then has influence on the strength of steam explosion .Different corium jet fragmentation models (CONST model and KHF model) were used to calcu-late the ex-vessel steam explosion for advanced PWR based on MC3D V3.8 code in order to discuss the effect of corium jet fragmentation model on ex-vessel steam explosion calculation .It is shown that these two models give similar premixing conditions .At the time of melt bottom contact ,explosion criteria of these two models are almost the same , so the strength of explosion triggering has a little difference ,which indicates that these two models have a little influence on steam explosion calculation if the time of corium bottom contact is chosen as triggering time for advanced PWR .On the defined condition for advanced PWR ,the maximum pressure near cavity wall is 20 MPa in approximation and the maximum impulse on cavity wall is smaller than 0.2 MPa · s .

关键词

蒸汽爆炸/粗混合/液柱碎化/熔融物液滴

Key words

steam explosion/premixing/jet fragmentation/corium drop

分类

能源科技

引用本文复制引用

陈巧艳,王辉,石雪垚..熔融物液柱碎化模型对先进压水堆堆外蒸汽爆炸计算的影响分析[J].原子能科学技术,2016,50(5):812-818,7.

原子能科学技术

OA北大核心CSCDCSTPCD

1000-6931

访问量0
|
下载量0
段落导航相关论文