工程科学学报2016，Vol.38Issue(z1)：169-174,6.DOI:10.13374/j.issn2095-9389.2016.s1.028
特殊钢石灰石炼钢脱磷工艺研究及实践
Study and practice on dephosphorization by limestone steelmaking of special steel
杜玉涛 1董大西 2朱荣 1杨韦华2
作者信息
- 1. 北京科技大学冶金与生态工程学院，北京100083
- 2. 河北钢铁集团石家庄钢铁有限责任公司，石家庄050031
- 折叠
摘要
Abstract
Based on the analysis of converter slagging and limestone slagging, the key point of smelting control and the operation strategies during the entire limestone steelmaking process were proposed in this paper, combined with the research of the double-slag-ging process by lime. According to the production practice in Shijiazhuang Iron and Steel Company, the entire limestone steelmaking of special steel was conducted. In the results, the average C content of the molten steel after converter tapping is 0. 16%, and the aver-age P content is 0. 011%, which meet the requirements of special steel production. Compared with the entire lime steelmaking, the cost of entire limestone steelmaking is reduced by ￥2. 32 per ton molten steel. The results of the industrial experiment show that the entire limestone steelmaking can make good economic benefits, and has some promotional values.关键词
转炉炼钢/特殊钢/石灰石炼钢/脱磷Key words
BOF steelmaking/special steel/limestone steelmaking/dephosphorization分类
冶金工业引用本文复制引用
杜玉涛,董大西,朱荣,杨韦华..特殊钢石灰石炼钢脱磷工艺研究及实践[J].工程科学学报,2016,38(z1):169-174,6.
