现代电子技术2016，Vol.39Issue(15)：171-175,5.DOI:10.16652/j.issn.1004-373x.2016.15.044
半实物仿真平台中GPS导航信息处理器的设计与实现
Design and implementation of GPS navigation information processor in semi-physical simulation platform
孙云春 1朱党锋 1刘一栋 1刘张博 1孙玉柱1
作者信息
- 1. 西安卫星测控中心 活动测控回收部，陕西 渭南 714000
- 折叠
摘要
Abstract
On the basis of the semi⁃physical simulation platform,the hardware and software of GPS information processor were designed. The signal received by coaxial high frequency feeder is sent to the GPS modular to receive the information source with NMEA0183 protocol format and pulse per second signal used for accurate time synchronization. The signal processing cir⁃cuit based on AT89C52 is used to extract the navigation information,and then send the GPS information source and relevant in⁃formation to the system master through serial communication port for using. The status bit in information frame is queried with the single chip microcomputer,and then the bilateral switch chip is used to select the light emitting diode to indicate the working con⁃dition. The analysis,extraction and forwarding for a variety of navigation information can ensure the real⁃time and reliably receiving and processing of the effective information,avoid occupying the main server′s processing time,and improve the real⁃time perfor⁃mance and effectiveness of information utilization.关键词
半实物仿真/全球定位系统/AT89C52/NMEA0183协议Key words
semi-physical simulation/GPS/AT89C52/NMEA0183 protocol分类
信息技术与安全科学引用本文复制引用
孙云春,朱党锋,刘一栋,刘张博,孙玉柱..半实物仿真平台中GPS导航信息处理器的设计与实现[J].现代电子技术,2016,39(15):171-175,5.
