压力容器2016，Vol.33Issue(6)：33-37,5.DOI:10.3969/j.issn.1001-4837.2016.06.006
UOP 再生器新型裙座设计研究
Design and Research for the New Typical Skirt of UOP Regeneration Tower
吕春磊 1赵骞 1潘晓栋1
作者信息
- 1. 兰州兰石重型装备股份有限公司 青岛设计部，山东 青岛 266520
- 折叠
摘要
Abstract
The skirt is one of the most important part of the vertical vessel,there is no way to confirm if the temperature field and material of the new typical skirt could satisify the operating temperature re-quirements for regeneration tower according to the domestic standards and specification.To solve this problem,one estimate method for material selection and temperature field was put forward.ANSYS was run to estimate and analyse the regeneration tower skirt to verify if the material selection is reasonable under the design temperature,to ensure that the skirt design would satisify the requirements for equip-ment operation.关键词
再生器/裙座/温度场/材料选择/有限元分析Key words
regeneration tower/skirt/temperature field/material selection/finite element analysis分类
机械制造引用本文复制引用
吕春磊,赵骞,潘晓栋..UOP 再生器新型裙座设计研究[J].压力容器,2016,33(6):33-37,5.
