中国机械工程2016，Vol.27Issue(13)：1740-1742,3.DOI:10.3969/j.issn.1004-132X.2016.13.008
气中微细电火花线切割加工实验研究
Experimental Study of Micro-wire Electrical Discharge Machining in Gas
摘要
Abstract
Micro-wire electrical discharge machining using gas as processing medium,might be used to process hard-cutting materials and complex parts,featured with low stress and no burr.The effects of slot width and roughness of specimens influenced by open circuit voltage,electrode capaci-tance,air pressure and relative electrode feed-rate were researched.Experimental results show that air pressure,relative electrode feed-rate and electrode capacitance have obvious effects on slot width and roughness.The change of open circuit voltage has little to do with processing results.关键词
微细电火花线切割/气中/切槽宽度/表面粗糙度Key words
micro-wire electrical discharge machining(micro-WEDM)/gas/slot width/roughness分类
金属材料引用本文复制引用
张開,王彪,杨福合,李川怀..气中微细电火花线切割加工实验研究[J].中国机械工程,2016,27(13):1740-1742,3.
