太赫兹科学与电子信息学报2016，Vol.14Issue(4)：487-491,5.DOI:10.11805/TKYDA201604.0487
D波段固态放大器模块设计
Design of D-band amplifier module
刘杰 1石向阳 2蒋均 1田遥岭2
作者信息
- 1. 中国工程物理研究院 电子工程研究所，四川绵阳 621999
- 2. 中国工程物理研究院 微系统与太赫兹研究中心，四川绵阳 621999
- 折叠
摘要
Abstract
The Ommic CGY2191UH chip model is reconstructed to establish a D-band amplifier module model. A D-band amplifier module is designed and fabricated to verify the accuracy of the model. The D-band amplifier module model consists of two waveguide models, two coplanar waveguide-rectangular waveguide transition models, two gold bonding wire models of the equivalent circuit model and a CGY2191UH chip. Based on current domestic technology, a D-band amplifier module is designed and fabricated. The test results show that the module would obtain a gain greater than 4.5dB in 110GHz-140GHz, and the biggest gain at 122GHz is 10dB. Gain test curves agree with the model simulation results well, which validates the model.关键词
D波段/放大器模块/太赫兹单片集成电路/D007IH工艺/石英微带电路Key words
D-band/amplifier module/Terahertz Monolithic Integrated Circuit/D007IH/quartz microstrip circuit分类
信息技术与安全科学引用本文复制引用
刘杰,石向阳,蒋均,田遥岭..D波段固态放大器模块设计[J].太赫兹科学与电子信息学报,2016,14(4):487-491,5.
