林业工程学报2016，Vol.1Issue(5)：36-39,4.DOI:10.13360/j.issn.2096-1359.2016.05.007
樟树剩余物制备重组木工艺与性能研究
Study on manufacturing process and performance of scrimber from residues of Cinnamomum camphora
摘要
Abstract
The aims of the present study are to produce scrimber from residues of Cinnamomum camphora with high per⁃formance and to investigate the mechanical properties of scrimber of C. camphora in different density. By using the novel scrimber manufacturing technology, this paper researches on manufacturing process and performance of scrimber from residues of C. camphora to realize the resource utilization of residues from C. camphora. Preparation of fibrosis wood ve⁃neer with remainder of the branches from wood processing residues, pruning and after extraction of essential oil as the raw material, after gluing, drying, assembling and hot pressing manufacturing, different density of scrimber from resi⁃dues of C. camphora has been obtained. We investigated the influences of density change on modulus of rupture, modu⁃lus of elasticity, shear strength ( parallel loading) , compression strength, thickness swelling rate of camphora scrimber from residues of C. camphora. According to the study, we found that samples with high density have a better dimensional stability than those samples with low density. The modulus of rupture, modulus of elasticity, shear strength ( parallel loading) , compression strength changes of scrimber from residues of C. camphora with high density was higher than that of samples with low density. The result shows that the various performance indexs of the scrimber from residues of C. camphora has excellent performance;The results also indicated that with the density increased from 0�8 g/cm3 to 1�20 g/cm3 , material properties increased gradually slow down, Therefore, on the premise of basic performance of scrimber guarantee, should as far as possible reducing the density of the material in a condition for the purpose of utility and cost control.关键词
樟树/剩余物/重组木/工艺/性能Key words
Cinnamomum camphora/residues/scrimber/process/performance分类
轻工纺织引用本文复制引用
胡玉安,何梅,王玉,张亚慧,张亚梅,章挺,于文吉..樟树剩余物制备重组木工艺与性能研究[J].林业工程学报,2016,1(5):36-39,4.基金项目
国家林业公益性行业科研专项（201404503）；国家自然科学基金项目（31560193）；江西省林科院科研及成果推广专项计划（201521501）。 （）
