中国电机工程学报2016，Vol.36Issue(18)：4894-4903,10.DOI:10.13334/j.0258-8013.pcsee.151741
实际系统次同步谐振建模的电网边界识别方法
Method of Identification of SSR Modeling Boundaries in Real Electrical Networks
摘要
Abstract
ABSTRACT:This paper investigated the impact of the natural resonant frequency and the corresponding resistance of the driving-point impedances on the electrical negative damping of subsynchronous torsional modes. It was proposed that the two parameters were the two critical parameters for the electrical negative damping of subsynchronous torsional modes. Thus, the sensitivity indexes of natural resonant frequency and the corresponding resistance on parameters of electrical elements were defined. On the base of the two sensitivity indexes, the quantitative method was developed to identify the study zone border buses for SSR modeling. Finally, the IEEE New England 10-machine 39-bus system modified by using IEEE FBM for SSR computation was used to validate the proposed method. The simulation results by the Prony method and PSCAD/EMTDC justify the proposed method for SSR modeling in time and frequency domains.关键词
次同步谐振/次同步谐振建模/频率决定特性/研究区域边界节点Key words
subsynchronous resonance (SSR)/SSR modeling/frequency dependent characteristic/study zone border buses分类
信息技术与安全科学引用本文复制引用
陈武晖,王龙,宿端鹏,王丹辉,汪妮,孙欣..实际系统次同步谐振建模的电网边界识别方法[J].中国电机工程学报,2016,36(18):4894-4903,10.基金项目
国家自然科学基金项目(51277089)。Project Supported by National Natural Science Foundation of China (NSFC)(51277089) （51277089）
