中国机械工程2016，Vol.27Issue(15)：2085-2090,6.DOI:10.3969/j.issn.1004-132X.2016.15.018
三辊非对称滚弯成形的数值仿真及试验验证
Numerical Simulation and Experimental Verification of Asymmetrical Three-roll Bending Process
摘要
Abstract
The stress field of deformation zone,the stain field of upper plate surface and the chan-ges of roll bending forces were analyzed during the asymmetrical and symmetrical roll bending process by the finite element(FE)simulation method.The simulation results show that the bending force dur-ing the asymmetrical roll bending process is larger than that during symmetrical roll bending under the same feed distance of the side roll.Compared to the asymmetrical roll bending process,the longi-tudinal and radial stress in deformation zone in the symmetrical roll bending process are smaller.The forming accuracy of the asymmetrical roll bending process of the pre-bending section is higher than that of symmetrical roll bending process.The experimental verification of a typical plates for the asym-metrical roll bending process was conducted,the result show that the forming error of FEA model is 6.8%.The FEA model has a higher forming accuracy.关键词
三辊非对称滚弯/应力场/卷制力/成形精度Key words
asymmetrical three-roll bending/stress field/bending force/forming accuracy分类
矿业与冶金引用本文复制引用
王艳,胡捷飞,许光辉,李曙生,熊巍..三辊非对称滚弯成形的数值仿真及试验验证[J].中国机械工程,2016,27(15):2085-2090,6.基金项目
2015江苏省重点研发计划资助项目(BE2015139) （BE2015139）
