烟草科技2016，Vol.49Issue(9)：82-86,5.DOI:10.16135/j.issn1002-0861.2016.0039
基于YL23C滤棒成型机组的超细支复合滤棒成型技术
Super-slim combined filter rod making based on YL23C filter rod combiner
徐思民 1王晓兵 1秦昌峰1
作者信息
- 1. 南通烟滤嘴有限责任公司，江苏省南通市崇川区胜利路6号 226014
- 折叠
摘要
Abstract
In order to produce super-slim ( 5.3 mm) combined filter rod, the key parts including raw filter rod cutting, conveying, combining and forming in YL23C filter rod combiner were optimized and modified. The key parameters of each component were determined via dynamic simulation and orthogonal experiment, and followed by practical running test. The results showed that: 1) Under the prerequisite of keeping the specification and performance of original YL23C filter rod combiner unchanged, the improved combiner could complete raw filter rod cutting and combining accurately and produce super-slim ( 5.3 mm) combined filter rods successfully. 2) The efficiency of the combiner reached 89.27%, and the qualified rate of combined filter rod was up to 100%. The circumference of tested samples ranged from 16.63 to 16.79 mm with the roundness≤0.33 mm. The modified YL23C filter rod combiner could be switched between super-slim and normal filter rod production.关键词
复合滤棒/成型机组/超细支/分切鼓轮/滤棒组合Key words
Combined filter rod/Filter rod combiner/Super-slim rod/Cutting drum/Filter rod combination分类
轻工纺织引用本文复制引用
徐思民,王晓兵,秦昌峰..基于YL23C滤棒成型机组的超细支复合滤棒成型技术[J].烟草科技,2016,49(9):82-86,5.
