棉纺织技术2016，Vol.44Issue(10)：54-57,4.
降低精梳条干不匀率的技术措施
Technology Measure to Reduce Combed Sliver Unevenness
刘允光1
作者信息
- 1. 聊城允光精梳技术服务中心，山东聊城，252000
- 折叠
摘要
Abstract
The technology measures to reduce combed sliver unevenness were discussed.The basic character-istics of combed sliver cycle unevenness were analyzed.It was summarized that combing clearness of web,overlap wave and mechanical wave were the main reasons affecting combed sliver unevenness.Reasonable carding effect and ideal joint & separation quality can be obtained by properly matching the veering clocking of separating roll-er,location of cylinder and nipper close clocking in comber with constant speed.Sliver unevenness could be effec-tively improved by suitably increasing the quantify of lap,reasonably using carding equipment,well controlling the machinery state and optimizing roller gauge in drafting area.Meanwhile,unexpected draft of combed sliver should be reduced as much as possible.It is considered that combed sliver unevenness can be reduced and yarn quality can be efficiently stabilized and improved by taking the above technology measures.关键词
精梳机/条干不匀率/搭接波/棉网清晰度/机械波/波长Key words
Comber/Yarn Unevenness/Overlap Wave/Clearness of Web/Mechanical Wave/Wavelength分类
轻工纺织引用本文复制引用
刘允光..降低精梳条干不匀率的技术措施[J].棉纺织技术,2016,44(10):54-57,4.
