有色金属材料与工程2016，Vol.37Issue(4)：176-179,4.DOI:10.13258/j.cnki.nmme.2016.04.010
铅黄铜复合分离法除 Pb 工艺探讨
Study on Technology of Removing Lead from Lead Brass with Compound Separation Method
郑少锋 1易志勇 1陈婷婷 1胡美俊1
作者信息
- 1. 江西理工大学 材料科学与工程学院，江西 赣州 341000
- 折叠
摘要
Abstract
This paper briefly describes the current technologies of removing lead from lead brass at home and abroad.Based on the theoretical analysis of compound separation method,it was inferred that Ca element had the potential of removing lead.The effects of Si-Ca and Mg-Ca on removing lead and properties of alloys without lead were summarized.The lead removal rate of brass melt reached 83% with Si-Ca as deleading agent and the Si content in brass substrate after deleading exceeds the limit;the lead removal rate of brass melt reached 77.3% with Mg-Ca as deleading agent and Mg added to the substrate reacts with Cu and generated metal compound Cu2 Mg,which possessed the ability of lubricating and chip-breaking similar to free lead in the process of cutting and removed lead from lead brass and developed a kind of brass that was environmental-friendly and easy-to-cut.关键词
铅黄铜/复合分离法/除 Pb/金属化合物/环保/易切削Key words
lead brass/compound separation method/deleading Pb/metal compounds/environmental protection/free cutting分类
矿业与冶金引用本文复制引用
郑少锋,易志勇,陈婷婷,胡美俊..铅黄铜复合分离法除 Pb 工艺探讨[J].有色金属材料与工程,2016,37(4):176-179,4.
