首页|期刊导航|中国机械工程|基于欧拉梁的准零刚度隔振系统动力特性分析

基于欧拉梁的准零刚度隔振系统动力特性分析OA北大核心CSCDCSTPCD

Analyses on Dynamics Characteristics of a Quasi-zero-stiffness Vibration Isolation System Based on Euler Beam

中文摘要英文摘要

将两端受轴向压力的欧拉梁和线性弹簧并联,组成一个具备高静刚度和低动刚度的准零刚度隔振器。通过对隔振系统进行静力分析,给出系统具备准零刚度特性所需的条件。利用谐波平衡法求解系统的振动微分方程,分析系统的幅频特性,给出了系统的力传递率,讨论了阻尼、激励力等参数对系统传递率的影响。最后分析了该隔振系统的跳跃频率。研究结果表明:激励力以及初始偏移量的增大会使系统的隔振效果变差,因此要控制激励力的大小并尽量避免超载;阻尼比的选取需要综合考虑高频的隔振效果和有效隔振频率范围。

Combining the Euler beam under axial pressures with a positive stiffness spring,a quasi-zero-stiffness vibration isolation system was obtained,which had high static stiffness and low dynamic stiffness characteristics.The requirements of the quasi-zero-stiffness system were achieved through the static characteristic analyses.The harmonic balance method was used to solve the dynamic differential equations.The steady state and amplitude frequency response of th…查看全部>>

高双;朱翔;谌宗琦;李天匀

华中科技大学,武汉,430074华中科技大学,武汉,430074华中科技大学,武汉,430074华中科技大学,武汉,430074

数理科学

欧拉梁准零刚度系统谐波平衡法力传递率跳跃频率

Euler beamquasi-zero-stiffness systemharmonic balance methodforce transmissi-bilityj umping frequency

《中国机械工程》 2016 (21)

水下非圆截面柱壳振动与声辐射特性研究

2869-2876,8

国家自然科学基金资助项目(51479079)

10.3969/j.issn.1004-132X.2016.21.006

评论

您当前未登录!去登录点击加载更多...