| 注册
首页|期刊导航|工程科学学报|利用显热对熔渣进行直接改质的热平衡分析及试验验证

利用显热对熔渣进行直接改质的热平衡分析及试验验证

卢翔 李宇 马帅 代文彬 苍大强

工程科学学报2016,Vol.38Issue(10):1386-1392,7.
工程科学学报2016,Vol.38Issue(10):1386-1392,7.DOI:10.13374/j.issn2095-9389.2016.10.006

利用显热对熔渣进行直接改质的热平衡分析及试验验证

Thermal equilibrium analysis and experiment of molten slag modification by use of its sensible heat

卢翔 1李宇 2马帅 1代文彬 2苍大强1

作者信息

  • 1. 北京科技大学钢铁冶金新技术国家重点实验室,北京100083
  • 2. 北京科技大学冶金与生态工程学院,北京100083
  • 折叠

摘要

Abstract

Preparing high added-value materials from molten slag directly by modifying molten slag has drawn a great interest in the utilization of molten slag because of its high efficiency during the integrated utilization of the heat and slag. In this paper, molten steel slag and sands were selected as typical molten slag and modifiers, respectively. The effects of the amount of added modifiers on the waste liquid sensible heat of modified molten slag were studied during the modification process, which was subsequently confirmed by industrial test. It is indicated that the sensible heat of modified molten slag increases at first and then decreases with the addition of modifiers. The sensible heat improves with the increase in mass fraction of modifiers from 5% to 11% and reaches the maximum at the mass fraction of 11%. The optimal amount of modifiers ranges from 11% to 19% in consideration of both the utilization of sensible heat and the performance of modified molten slag. Furthermore, the industrial test verifies that both the fluidity of modified molten slag and the stability of cooled modified slag are significantly improved at the addition of about 12% modifiers.

关键词

熔渣/显热/改质/热平衡/工业试验

Key words

molten slag/sensible heat/modification/thermal equilibria/industrial test

分类

矿业与冶金

引用本文复制引用

卢翔,李宇,马帅,代文彬,苍大强..利用显热对熔渣进行直接改质的热平衡分析及试验验证[J].工程科学学报,2016,38(10):1386-1392,7.

基金项目

“十三五”国家重点研发计划资助项目(2016YFB0601304) (2016YFB0601304)

国家留学基金资助项目(201406465049) (201406465049)

工程科学学报

OA北大核心CSCDCSTPCD

2095-9389

访问量0
|
下载量0
段落导航相关论文