林业工程学报2016，Vol.1Issue(6)：119-123,5.DOI:10.13360/j.issn.2096-1359.2016.06.020
小径木刨切单板纤维化处理设备整机结构设计
The structural design of small-diameter wood sliced veneer fibrosis treatment equipment
摘要
Abstract
In order to address the shortcomings of traditional scrimber in aspects of oversized wood bunch unit, irregular wood fiber shape, and non⁃uniform of relief degree, a fibrosis treatment equipment aiming at producing small wooden bunch unit has been developed. On the basis of analyzing the structure and working principle of the existing equipment, this study is focused on determining the main technical parameters of small⁃diameter wood sliced veneer fibrosis treatment equipment. The structure composition of small⁃diameter wood sliced veneer fibrosis treatment equipment has been de⁃signed including the diameter of crushing shaft, parameters of crushing shaft tooth, configuration of crushing shaft tooth, and the fine⁃adjustment device of crushing shaft. The fibrosis veneer produced by the small⁃diameter wood sliced veneer fibrosis treatment equipment has the characteristics of non⁃fracture longitudinal fibers, the uniform thickness, and with the width of the fiber bundle distributed approximately from 1 mm to 3 mm. The scrimber products with different perform⁃ance indicators can be achieved if take fibrosis veneer as the basic production unit. As one of the important equipment to manufacture new type of scrimber, small⁃diameter wood sliced veneer fibrosis treatment equipment can provide high⁃quality raw materials for new scrimber products.关键词
刨切单板/疏解设备/重组木/辗压疏解/结构设计Key words
sliced veneer/fibrosis treatment equipment/scrimber/crushing/structural design分类
农业科技引用本文复制引用
马岩,许琼晓,许世祥,邢力平..小径木刨切单板纤维化处理设备整机结构设计[J].林业工程学报,2016,1(6):119-123,5.基金项目
国家林业公益性行业科研专项（201404503）；黑龙江省自然科学基金项目（C201336）。 （）
