中国电机工程学报2016，Vol.36Issue(22)：6111-6121,11.DOI:10.13334/j.0258-8013.pcsee.152478
直流电网电压控制器的参数计算方法
Controller Parameters Calculating Method of DC Voltage Loop for DC Grid
摘要
Abstract
The reasonable parameters in constant DC voltage controller are the prerequisite of DC grid for effectiveness operation. Combined the network equation of DC grid with the small signals mathematical model of single converter’s DC output voltage based on Thevenin equivalent model, the generic small signals mathematical model of DC grid was established. In order to achieve the quantitative calculation of controller parameters in the outer loop of constant DC voltage control station, an equivalent method was proposed in this paper. This method, which gives convenience to realize the parameters quantitative calculation of dc voltage controller, can reduce the order of original DC grid mathematical model greatly with scarcely influence on the operational performance of DC grid. Based on a five-terminals dc grid, an electromagnetic transient simulation model and small signals mathematical model calculating program for DC grid were established, the simulation results of which verify the correctness of the small disturbance model and the parameters quantitative calculating method.关键词
模块化多电平换流器/高压直流输电/直流电网/小干扰/等效模型/戴维南等效模型Key words
modular multilevel converter (MMC)/high voltage direct current transmission (HVDC)/DC Grid/small disturbance/equivalence model/Thevenin's equivalent model分类
信息技术与安全科学引用本文复制引用
李云丰,汤广福,庞辉,吴亚楠,贺之渊,安婷..直流电网电压控制器的参数计算方法[J].中国电机工程学报,2016,36(22):6111-6121,11.基金项目
国家电网公司科技项目(SGRIZLKJ[2015]457)。Science and Technology Project Supported by the State Grid Corporation of China (SGRIZLKJ[2015]457) （SGRIZLKJ[2015]457）
