电测与仪表2016，Vol.53Issue(21)：65-70,6.
分布式电源接入配电网的最佳位置和容量研究
Study on the optimal location and capacity of distributed generation access to distribution network
王玉梅 1吴志明1
作者信息
- 1. 河南理工大学电气工程与自动化学院，河南焦作454000
- 折叠
摘要
Abstract
This paper proposes a method to choose the optimal position and capacity for the distributed generation con -nected to the distribution networks based on the times of reverse power flow , voltage quality and network loss .This method employs sequential Monte-Carlo simulation to deal with the randomness characteristics of photovoltaic and wind power output , and the loads of the distribution networks are weighted according to the operation characteristics of the power distribution networks .With the most improvements of the voltage , the least times of the reverse power flow and the least network loss as the target functions and the node voltage , the active and reactive power as the constraint con-ditions, it applies Newton method to calculate the power flow of the distribution network to get the optimal position and capacity .Combined with the actual distribution network , the simulation results proved the practicability and effective-ness of the proposed method .关键词
位置和容量/风光联合系统/序贯蒙特卡洛模拟/牛顿法/潮流计算Key words
position and capacity/photovoltaic and wind power system/sequential Monte-Carlo simulation/Newton method/power flow calculation分类
信息技术与安全科学引用本文复制引用
王玉梅,吴志明..分布式电源接入配电网的最佳位置和容量研究[J].电测与仪表,2016,53(21):65-70,6.
