焊管2016，Vol.39Issue(11)：9-13,5.DOI:10.19291/j.cnki.1001-3938.2016.11.003
Inconel 625镍基合金带极电渣堆焊试验研究
Experiments Study on Inconel 625 Nickel-Based Alloy Strip with Electroslag Cladding
张淑雁 1任旭升 2徐成 1王智慧 3马秀清3
作者信息
- 1. 上海蓝滨石化设备有限责任公司, 上海 201518
- 2. 重庆大学 化学与化工学院, 重庆 400044
- 3. 机械工业上海蓝亚检测所有限责任公司, 上海 201518
- 折叠
摘要
Abstract
In order to solve the welding difficulties of electroslag cladding welding with Inconel 625 nickel-base alloy strip and find the best electroslag cladding welding procedure, the welding performance of electroslag cladding welding was analyzed,the effects of welding parameters to the welding quality was also discussed in this article. A set of suitable cladding welding procedure of Inconel 625 Ni-base electroslag cladding was summarized by lots of specific test. The rationality and feasibility of the welding procedure was checked by chemical analysis,mechanical property test,metallographic examination, corrosion test and so on. The results showed that the cladding welding procedure was suitable and the cladding layer was applicable to product.关键词
焊接/Inconel625/镍基合金/电渣堆焊/金相检验/腐蚀试验Key words
welding/Inconel 625/nickel-base alloy/electroslag cladding/metallographic examination/corrosion test分类
矿业与冶金引用本文复制引用
张淑雁,任旭升,徐成,王智慧,马秀清..Inconel 625镍基合金带极电渣堆焊试验研究[J].焊管,2016,39(11):9-13,5.
