兵工自动化2016,Vol.35Issue(12):10-13,4.DOI:10.7690/bgzdh.2016.12.004
基于FPGA的K波段VCO宽带线性校正
Linearity Correction of K-band VCO Broadband Based on FPGA
侯卫国 1翟霄汉 2杨作祥2
作者信息
- 1. 南京理工大学电子工程与光电技术学院,南京 210094
- 2. 中国人民解放军73908部队,南京 210084
- 折叠
摘要
Abstract
In order to solve the problems of complex, high cost, and difficult debugging of K band wideband linear correction device, a VCO open loop linear correction method based on FPGA is proposed. With VCO tuning characteristics of the open loop linear correction principle, we can make open loop broadband linear correction for the VCO tuning characteristics on the basis of the D/A chip controlled by FPGA. At the same time, the clock generated by controlling FPGA can generate arbitrary wide linear frequency modulation continuous wave and carry out experiments. Experiment results show that, when bandwidth is 400 MHz, the nonlinear is less than 0.1%, the open loop linear correction method is simple, low cost and satisfies the system index requirements.关键词
开环线性校正/VCO/FPGAKey words
open loop linear correction/VCO/FPGA分类
信息技术与安全科学引用本文复制引用
侯卫国,翟霄汉,杨作祥..基于FPGA的K波段VCO宽带线性校正[J].兵工自动化,2016,35(12):10-13,4.