金刚石与磨料磨具工程2016，Vol.36Issue(6)：35-40,6.DOI:10.13394/j.cnki.jgszz.2016.6.0008
高频感应钎焊热管砂轮仿真与试验研究
Simulation and experiment of the heat pipe grinding wheel with high frequency induction brazing
摘要
Abstract
An induction heater is designed to be suitable for high frequency induction heating heat-pipe-grinding-wheel HPGW Through the simulation software the influence of three parameters namely magnitude of current heating gap and coil angle on the temperature distribution of the HPGW is analyzed After the optimized parameter combination is optimized the CBN HPGW is made by using the newly designed induction heater and high frequency induction brazing technology The experiment results demonstrate that the substrate temperature distribution is both uniform and in agreement with the simulation The solder combines the substrate and abrasives well while CBN abrasives distribute orderly The design of brazing process parameters and heater structure is reasonable.关键词
感应电流/加热间隙/线圈夹角/钎焊温度/CBN 砂轮Key words
induction current/heat gap/coil angle/brazing temperature/CBN grinding wheel分类
矿业与冶金引用本文复制引用
高俊杰,傅玉灿,陈佳佳,顾志斌..高频感应钎焊热管砂轮仿真与试验研究[J].金刚石与磨料磨具工程,2016,36(6):35-40,6.基金项目
国家自然科学基金项目(51175254) （51175254）
