机械与电子2017，Vol.35Issue(1)：8-10,14,4.
弧面十字滑块联轴器的设计与研究
Design and Research of the Arc Surfaced Oldham Coupling
摘要
Abstract
The arc surfaced Oldham coupling can compensate the relative displacement of the two shafts for instal-lation and operation,but requires no intersection angle between the driving shaft and the driven shaft.Furthermore, the relative displacement between the two shafts can cause great centrifugal force in the intermediate plate,thereby the dynamic load and wear will be increased and the service life of the coupling will be reduced.Based on the analysis of the problem from the perspective of TRIZ,an arc surfaced Oldham coupling was designed.With reference to the tech-nical parameters of SL70 Oldham coupling,the three dimensional modeling was built and the statics analysis was conducted by using the Pro/E software and ANSYS Workbench software.The research indicated that the new arc surfaced Oldham coupling with the same nominal torque could satisfy the requirements for strength and stiffness.关键词
十字滑块联轴器/TRIZ/建模/静力学分析Key words
Oldham coupling/TRIZ/modeling/static analysis分类
机械制造引用本文复制引用
杨福芹,蒋典兵,杨宇航..弧面十字滑块联轴器的设计与研究[J].机械与电子,2017,35(1):8-10,14,4.基金项目
山东省自然科学基金(ZR2015EM037) （ZR2015EM037）
