林业工程学报2017，Vol.2Issue(1)：119-124,6.DOI:10.13360/j.issn.2096-1359.2017.01.021
陶瓷刀具车削木质复合材料的切削性能
Cutting performance of ceramic tool in turning wood-based composites
摘要
Abstract
The cutting performance of a reinforced alumina⁃based ceramic cutting tool was investigated by turning medi⁃um density fiberboard ( MDF) and plywood samples on a lathe. During the woodturning process, the dynamic cutting forces were measured by a Kistler dynamometer. The microstructure of the ceramic tool was observed by scanning e⁃lectron microscopy (SEM), and the tool wear mechanism was analyzed by energy dispersive spectroscopy (EDS). After comparing the effects of cutting parameters and sample materials on the cutting forces, it was found that the cut⁃ting force parallel to the feed direction ( FY ) and the cutting force perpendicular to the feed direction ( FZ ) both de⁃creased with the increase of spindle speed, but increased with the increase of feed rate. The resultant cutting force ( FR ) in turning plywood was higher than that in turning MDF. With the same cutting parameters, the tool wear in turning plywood was more significant than that in turning MDF. The main wear patterns were micro⁃chipping, chip⁃ping and flank wear, and the main wear mechanism was abrasive and adhesive wear.关键词
陶瓷刀具/纤维板/胶合板/切削力/刀具磨损Key words
ceramic cutting tools/MDF/plywood/cutting forces/tool wear分类
矿业与冶金引用本文复制引用
朱兆龙,郭晓磊,赵飞,邱学海,郑琳,曹平祥,朱南峰..陶瓷刀具车削木质复合材料的切削性能[J].林业工程学报,2017,2(1):119-124,6.基金项目
国家自然科学基金项目（31500480）；江苏高校优势学科建设工程资助项目（PAPD）。 （）
