林业科学2016，Vol.52Issue(12)：106-111,6.DOI:10.11707/j.1001-7488.20161213
小径木星形纵向锯解后重组刨切单板的数学理论描述
Description of Small-Diameter Wood Sliced Veneer after Star-Sawing in Longitudinal Direction and Recombining by Mathematical Method
摘要
Abstract
Objective]The current study proposed a measure which sliced the reconstituted sector board after star-sawing in longitudinal direction in order to improve the volume ratio of log.[Method]This study firstly conducted a mathematical model on the ideal log model. Then,established face cut board mathematical model from the short trail direction and the long trail direction. On the basis of the established mathematical model of log and face cut board,the optimal star-sawing pattern and sliced face cut board diagram could be established. Finally,this paper calculated volume ratio of log which sliced under two different processes consisting of star-sawing and sliced directly.[Result]The analysis pointed out that the width of slicing face cut board,which perpendicular to the short trail direction,was greater than that perpendicular to the long trail direction. It was reasonable to slice face cut board perpendicular to short trail direction if the veneer’s width was required. However,if the veneer’s quality was an important factor,it should be cut perpendicular to the long trail direction. The calculated results showed that the volume ratio of log could be improved by new star-sawing sliced technology. [Conclusion]This study demonstrated the theory that star-sawing method can improve the volume ratio of log provided the theoretical support for the actual selection,the volume ratio of log could be improved to a certain degree by choosing larger size log when slicing veneer.关键词
弦切单板/星形下锯/刨切/数学模型/出材率Key words
face cut board/star-sawing/sliced/mathematical model/volume ratio分类
轻工纺织引用本文复制引用
马岩,许洪刚,杨春梅,许世祥..小径木星形纵向锯解后重组刨切单板的数学理论描述[J].林业科学,2016,52(12):106-111,6.基金项目
林业公益性专项项目(201404503) （201404503）
中央高校基本科研业务费专项资金项目(2572015DB02)。 （2572015DB02）
