| 注册
首页|期刊导航|农机化研究|棉箱压实搅龙机构对籽棉压缩作用仿真及分析

棉箱压实搅龙机构对籽棉压缩作用仿真及分析

孔凡婷 石磊 张玉同 陈长林 孙勇飞 谢庆 黄铭森

农机化研究2017,Vol.39Issue(10):77-81,5.
农机化研究2017,Vol.39Issue(10):77-81,5.

棉箱压实搅龙机构对籽棉压缩作用仿真及分析

Simulation and Analysis on Compression Effect of Screw Conveyor in the Hopper on Seed Cotton

孔凡婷 1石磊 1张玉同 1陈长林 1孙勇飞 1谢庆 1黄铭森1

作者信息

  • 1. 农业部南京农业机械化研究所,南京 210014
  • 折叠

摘要

Abstract

A discrete element simulation model is established with EDEM for compaction screw conveyor in the hopper. And simulation analysis on compression process of seed cotton during Working Process of compaction screw conveyor which provides guidance for structure design of compaction screw conveyor. Simulation results show that the compaction force of seed cotton produced by push function of compaction screw conveyor, and seed cotton compressions, adhesion, twisting force between particles are increased with the increase of the number of seed cotton. While the number of seed cotton no longer increases, seed cotton inter-atomic forces, smaller total compression force leveling off during the push stage. After the push stage, although seed cotton quantity does not increase, but under compaction stir the push of the compaction screw conveyor, seed cotton accumulation and extrusion in the front of hopper, the compression force of seed cotton increased significantly, so the total compression force of seed cotton rapidly increasing. Variable diameter compac-tion stir dragon institutions due to beat the dragon former after the small diameter, the accumulation in cotton seed cotton at the end of the box by the trail stirring dragons to stabilize the throughput of push forward, the front big diameter stirring the dragon will be a lot of seed cotton push compression, variable diameter compaction screw conveyor shows good effect on periodically push and compaction.

关键词

籽棉压缩/搅龙/EDEM仿真

Key words

seed cotton compression/compaction screw conveyor/EDEM simulation

分类

农业科技

引用本文复制引用

孔凡婷,石磊,张玉同,陈长林,孙勇飞,谢庆,黄铭森..棉箱压实搅龙机构对籽棉压缩作用仿真及分析[J].农机化研究,2017,39(10):77-81,5.

基金项目

“十二五”国家科技支撑计划项目(2013BAD08B02) (2013BAD08B02)

中国农业科学院创新工程-茎秆类收获机械(2016-2020) (2016-2020)

农机化研究

OA北大核心

1003-188X

访问量4
|
下载量0
段落导航相关论文