| 注册
首页|期刊导航|中国塑料|回温效应对典型泡沫塑料准静态力学特性的影响

回温效应对典型泡沫塑料准静态力学特性的影响

江伟 卢玉斌 苏实 余昆岭

中国塑料2017,Vol.31Issue(1):36-42,7.
中国塑料2017,Vol.31Issue(1):36-42,7.DOI:10.19491/j.issn.1001-9278.2017.01.007

回温效应对典型泡沫塑料准静态力学特性的影响

Effect of Temperature Cycle on Quasi-static Mechanical Behavior of Representative Foam Plastics

江伟 1卢玉斌 1苏实 1余昆岭2

作者信息

  • 1. 西南科技大学制造科学与工程学院,四川 绵阳621010
  • 2. 北京睿拓时创科技有限公司,北京100025
  • 折叠

摘要

Abstract

The quasi-static tensile and compression tests of temperature-cycling treated silicone rubber foam(SRF)and rigid polyurethane foam (RPUF)were conducted to investigate the effect of temperature cycle on their mechanical properties by three-dimensional digital speckle dynamic deformation techniques.The results indicated the tensile strength of SRF and high-density RPUF were influenced by temperature cycle more significantly compared with low-density RPUF in the quasi-static tensile process,which led to a remarkable improvement in tensile strength.In the case of SRF,the compressive strength and Young’s modulus were improved remarkably,and the elastic deformation was also increased to some extent.However,its yield phenomenon was not so evident. In the case of low-density RPUF, the temperature-cycling treatment led to an improvement in yield stress but resulted in shortening of yield stage and a decrease in plastic deformation.As for the high density RPUF,not only the elastic deformation was improved,but the yield stage was also extended due to the temperature-cycling treatment.However,its loading capability to pressure was reduced in the quasi-static compression process.

关键词

硅橡胶泡沫/硬质聚氨酯泡沫/回温效应/应力分布

Key words

silicone rubber foam/rigid polyurethane foam/effect of temperature cycle/stress distri-bution

分类

化学化工

引用本文复制引用

江伟,卢玉斌,苏实,余昆岭..回温效应对典型泡沫塑料准静态力学特性的影响[J].中国塑料,2017,31(1):36-42,7.

基金项目

NSAF联合基金(U1430110);西南科技大学研究生创新基金项目 ()

中国塑料

OA北大核心CSCDCSTPCD

1001-9278

访问量0
|
下载量0
段落导航相关论文