硅酸盐通报2017，Vol.36Issue(1)：296-300,5.
高温下多种工业固体废弃物复配体系的熔融特性研究
Melting Characteristics of Complex of Different Types of Industrial Solid Waste at High Temperature
摘要
Abstract
Five samples of industrial solid waste were formulated by the different acidity coefficient. The characteristic temperature was tested by ash fusion point determination meter, and the high-temperature viscosity was detected by high-temperature viscosity tester. The result show that the melting temperature increases with the increase of the acidity coefficient during the range of acidity coefficient of 0 . 95-1 . 19 , especially for the sample with higher acidity coefficient. The viscosity of the high-temperature melt always increase with the temperature decreases, when the viscosity increased from 0 mPa·s to 1000 mPa·s, the rate of the viscosity changed with temperature, which seems relate to the content of Fe2 O3 in the test sample, but lack of correlation with the acidity coefficient. As a whole, the rate of the viscosity changed with temperature decrease with the content of Fe2 O3 increases.关键词
固体废弃物/酸度系数/熔融温度/高温黏度Key words
solid waste/acidity coefficient/melting temperature/high-temperature viscosity分类
资源环境引用本文复制引用
王皓,马志斌,廖洪强,程芳琴..高温下多种工业固体废弃物复配体系的熔融特性研究[J].硅酸盐通报,2017,36(1):296-300,5.基金项目
国家自然科学基金青年科学基金(21506121) （21506121）
山西省煤基重点科技攻关项目(MC2014-06) （MC2014-06）
