| 注册
首页|期刊导航|玻璃钢/复合材料|不同加入方式对高温后玄武岩纤维再生混凝土力学性能的影响

不同加入方式对高温后玄武岩纤维再生混凝土力学性能的影响

郭瑞晋 毕重 王涪 王盼乐 陈尧

玻璃钢/复合材料Issue(2):88-92,5.
玻璃钢/复合材料Issue(2):88-92,5.

不同加入方式对高温后玄武岩纤维再生混凝土力学性能的影响

EFFECTS OF DIFFERENT MIXING METHODS ON MECHANICAL PROPERTIES OF BASALT FIBER REINFORCED CONCRETE AFTER HIGH TEMPERATURE

郭瑞晋 1毕重 1王涪 1王盼乐 1陈尧1

作者信息

  • 1. 辽宁工业大学,锦州 121001
  • 折叠

摘要

Abstract

In this study,the effects of two different fibers (cement slurry wrapped fiber,direct incorporation) on the compressive strength and tensile strength of reinforced coarse aggregate concrete were studied under different basalt fiber volume (0%,0.1%,0.15%,0.2%) and high temperature(20 ℃,200 ℃,400 ℃,600 ℃).The strength ratio of the indirect mixing method was higher than that of the direct mixing method,but the variable was different and the range of the increase was different.When the temperature was kept constant,the increase amplitude of compressive strength is increased with the increase of fiber content,and the maximum is 0.2%.The increase amplitude of splitting tensile strength is decreased with the increase of fiber content,and the maximum is 0.1%.When the dosage is constant,the increasing range of compressive strength shows the trend of the broken line with the change of temperature.It presented an upward trend between 20 ℃ and 200 ℃,tended to be gentle between 200 ℃ and 400 ℃,and rose again between 400 ℃ and 600 ℃.The splitting tensile strength is basically unchanged with the increased amplitude between 20 ℃ and 200 ℃,but presented a trend of sharp decline after 200 ℃.

关键词

玄武岩纤维/加入方式/高温/强度

Key words

basalt fiber/incorporation manner/high temperature/strength

分类

通用工业技术

引用本文复制引用

郭瑞晋,毕重,王涪,王盼乐,陈尧..不同加入方式对高温后玄武岩纤维再生混凝土力学性能的影响[J].玻璃钢/复合材料,2017,(2):88-92,5.

玻璃钢/复合材料

OA北大核心CSCD

2096-8000

访问量4
|
下载量0
段落导航相关论文