火炸药学报2017，Vol.40Issue(1)：97-100,4.DOI:10.14077/j.issn.1007-7812.2017.01.019
基于图像传感器的推进剂发烟量测试方法
Test Method of Propellant Smoke Density Based on Image Sensor
摘要
Abstract
A propellant smoke density test method based on image sensor was proposed.In this method, the halogen lamp was replaced by a collimator, the photoelectric diode or photosensitive resistance was replaced by an image sensor, and a lens hood with hollow stripes on surface was designed to modulate light source.The effect of environmental noise on test results was eliminated by image processing method.The combustion smoke densities of SQ2 propellant, Al-CMDB propellant and NEPE propellant were measured.The results show that the transmittance curves of SQ2 and Al-CMDB propellants are basically stable at about 50s after ignition.The transmittance curve of NEPE propellant is stable after 50s of ignition, but has a slow upward trend.The smoke transmittance of the above three propellants are 84.1%,65.9%,22.3%,respectively, which are consistent with those obtained using the traditional test method.关键词
推进剂/发烟量/羽流烟雾/图像传感器/平行光管/烟雾光透过率Key words
propellant/smoke density/plume smoke/image sensor/collimator/smoke transmittance分类
军事科技引用本文复制引用
王长健,张克旺,孙美,杨燕京,许毅..基于图像传感器的推进剂发烟量测试方法[J].火炸药学报,2017,40(1):97-100,4.基金项目
国家自然科学基金资助(201503163) （201503163）
