机械与电子2017，Vol.35Issue(2)：32-35,76,5.
氮化硅轴承套圈沟道的超精研工艺实验研究
Research on Superfinishing Experiments on Raceway of Si3N4 Ceramic Bearing Outer Rings
摘要
Abstract
In order to control raceway roughness of Si3N4 bearings under P4 level(≤0.063 μm),orthogonal experiments concerning superfinishing parameters of superfinishing time,workpiece tangential velocity,oilstone pressure and oscillation speed were carried out to optimize superfinishing process.A validation experiment was conducted subsequently to verify the optimization results.The experimental results showed that the roughness value of the raceway surface,processed by the superfinishing scheme,was the lowest,and the ceramic material quality and grinding process of raceway played a decisive role in promoting superfinishing raceway quality.It was concluded that the raceway surface obtained by the optimal scheme can meet the requirement of P4 grade roughness of the bearing,and the quality of the material and the grinding process shall be controlled to further improve the superfine surface quality of the raceway.关键词
氮化硅/轴承/套圈/沟道/超精/粗糙度Key words
Si3N4/bearing/outer ring/raceway/superfinishing/roughness分类
机械制造引用本文复制引用
李颂华,秘文博,吴玉厚,孙健..氮化硅轴承套圈沟道的超精研工艺实验研究[J].机械与电子,2017,35(2):32-35,76,5.基金项目
辽宁省高等学校优秀人才支持计划(LR2015053) （LR2015053）
辽宁省自然科学基金(2015020149) （2015020149）
沈阳市科技计划项目(F16-205-1-15) （F16-205-1-15）
高档石材数控加工装备与技术国家地方联合工程实验室开放基金(SJSC-2015-3) （SJSC-2015-3）
