中国医疗设备2017，Vol.32Issue(2)：24-27,42,5.DOI:10.3969/j.issn.1674-1633.2017.02.006
胰十二指肠切除术吻合器的制备与性能
Preparation and Properties of Anastomat for Pancreaticoduodenectomy
摘要
Abstract
In order to effectively prevent the leakage of the pancreatic fluid during pancreaticoduodenectomy,this study took methyl vinyl silicone rubber as main material and prepares a pancreaticojejunostomy anastomat for clinical application.Through one step vulcanization molding with pre-embedded titanium nails,using silicone rubber as matrix,adding vulcanizing agent and reinforcing filling,etc.,the thermal property,mechanical property and chemical resistance property of the anastomat were analyzed.Results showed that when quality loss was 5％,the corresponding temperature of anastomat was 429.9℃.The breaking elongation rate and tensile strength decreased only 25.6％ and 2.3％ after enduring in 280℃ hot air for 6 h.The maximum quality loss was only 5.63％ after soaking in the distilled water,3％ dioxygen water,75％ alcohol,hydrochloric acid (pH=0.8) and sadium hydroxide solution (pH=9) respectively.By using pancreaticojejunostomy anastomat,the fibrin hyperplasia between pancreas and intestinal wall will be promoted,normal blood circulation of duodenum and pancreas will also be enhanced,thus established the experimental basis for reducing operation difficulty,shortening surgery time and achieving high operative success rate.关键词
胰十二指肠切除术/硅胶胰肠吻合器/一次硫化成型/耐热性分析/耐介质性分析Key words
pancreaticoduodenectomy/silicone rubber pancreaticojejunostomy anastomat/one step vulcanization molding/thermal property analysis/chemical resistance analysis分类
机械制造引用本文复制引用
张亮,李颖,马峰..胰十二指肠切除术吻合器的制备与性能[J].中国医疗设备,2017,32(2):24-27,42,5.基金项目
陕西省教育厅科研计划项目资助项目(2013JK0920) （2013JK0920）
西部地区人才培养特别项目(留金法[2014]5049,201408615042). （留金法[2014]5049,201408615042）
