中国机械工程2017，Vol.28Issue(4)：432-437,450,7.DOI:10.3969/j.issn.1004-132X.2017.04.010
基于边等距偏移的环切加工刀具路径生成方法
Contour-parallel Tool Path Generation Method Based on Pair-wise Offset
摘要
Abstract
A contour-parallel tool path generation method was proposed based on pair-wise offset to solve the problems of generating contour-parallel tool paths,which were composed of lines and arcs.The convex vertex and interfering concave vertex of closed contour were used as a start point re-spectively,and the local and global invalid areas of contour including lines and arcs were identified re-spectively with the method combining pair-wise-interference-detection(PWID)procedures and arc seg-mentation processing.Non-interference contour-parallel tool path was generated by offsetting the closed contour without invalid area.The proposed method was realized in the self-developed CAD/CAM software.The simulation results show that the tool path without interference area may be gen-erated accurately and effectively with the proposed method,and may be applied to closed contours with islands as well.关键词
等距偏移/环切/无效区域/干涉检测Key words
pair-wise offset/contour-parallel/invalid area/interference-detection分类
信息技术与安全科学引用本文复制引用
潘海鸿,甘霖,俞宗薏,陈琳..基于边等距偏移的环切加工刀具路径生成方法[J].中国机械工程,2017,28(4):432-437,450,7.基金项目
国家自然科学基金资助项目(51465005) （51465005）
广西科技攻关项目(桂科转1599002-16) （桂科转1599002-16）
广西制造系统与先进制造技术重点实验室项目(14-045-15S09) （14-045-15S09）
