压力容器2016，Vol.33Issue(12)：1-6,6.DOI:10.3969/j.issn.1001-4837.2016.12.001
复合材料气瓶充放气过程仿真与验证
Simulation and Experimental Validation on Charge/Discharge of Composite Cylinders
王恺 1陈二锋 2张翼 2王道连 2伍继浩2
作者信息
- 1. 中国科学院理化技术研究所,北京100190
- 2. 北京宇航系统工程研究所,北京100076
- 折叠
摘要
Abstract
The thermodynamic basis of charging and discharging process of composite cylinders was described.Based on the system simulation software AMESim,the convective and conduction heat transfer models of the inner wall and the outer wall during the charge and discharge process of composite cylinder were constructed.Based on the models,the pressure and temperature characteristics were studied numeri cally.By comparing the results of the simulation and the experimental data of charge and discharge of composite cylinder,the models' effectiveness was validated.Results indicate that the models can adapt to different media and charge or discharge modes.关键词
复合材料气瓶/充放气/仿真/试验Key words
composite cylinder/charge/discharge/simulation/experiment分类
机械制造引用本文复制引用
王恺,陈二锋,张翼,王道连,伍继浩..复合材料气瓶充放气过程仿真与验证[J].压力容器,2016,33(12):1-6,6.
