| 注册
首页|期刊导航|中国机械工程|含气油液有效体积弹性模量理论模型研究

含气油液有效体积弹性模量理论模型研究

唐东林 吴凡 贾品元 曾志春

中国机械工程2017,Vol.28Issue(3):300-304,333,6.
中国机械工程2017,Vol.28Issue(3):300-304,333,6.DOI:10.3969/j.issn.1004-132X.2017.03.008

含气油液有效体积弹性模量理论模型研究

Research on Theoretical Model for Effective Bulk Modulus of Air-liquid Mixtures of Hydraulic Oil

唐东林 1吴凡 1贾品元 2曾志春1

作者信息

  • 1. 西南石油大学机电工程学院,成都,610500
  • 2. 中国石油长庆油田公司第五采油厂,西安,710020
  • 折叠

摘要

Abstract

In order to predict the effective bulk modulus of air-liquid mixtures of hydraulic oil below the saturation pressure accurately,based on the definition of the bulk modulus and law of mass conservation,according to the air release and cavitation processes,a theoretical model for effective bulk modulus of air-liquid mixtures of hydraulic oil below the saturation pressure was proposed.The numerical calculation results show that the B-p curve of the theoretical model for effective bulk modulus of air-liquid mixtures of hydraulic oil shows good agreement with the B-p curves of published literature's theoretical model and fitted experimental data,verifing the accuracy of the theoretical model,especially the extreme low pressure region below the atmospheric pressure.The effective bulk modulus of air-liquid mixtures of hydraulic oil is more consistent to practical conditions.Furthermore,the effects of initial air content,pressure and pressure rising time on effective bulk modulus were analyzed.The results show that below the saturation pressure area,the effective bulk modulus deceases with the increasing of initial air content,and the effective bulk modulus increases in a narrow range with the increasing of the pressure rising time.

关键词

液压油液/有效体积弹性模量/初始含气量/空气分离压/升压时间

Key words

hydraulic oil/effective bulk modulus/initial air content/saturation pressure/pressure rising time

分类

机械制造

引用本文复制引用

唐东林,吴凡,贾品元,曾志春..含气油液有效体积弹性模量理论模型研究[J].中国机械工程,2017,28(3):300-304,333,6.

中国机械工程

OA北大核心CSCDCSTPCD

1004-132X

访问量0
|
下载量0
段落导航相关论文