现代制造工程Issue(4)：86-90,5.DOI:10.16731/j.cnki.1671-3133.2017.04.017
30CrNiMo8钢高速磨削力研究
Research on the grinding force of high speed grinding 30CrNiMo8 steel
牟红平 1赵恒华 1赵学洋1
作者信息
- 1. 辽宁石油化工大学机械工程学院,抚顺113001
- 折叠
摘要
Abstract
30CrNiMo8 steel is the typical material which is difficult to manufacture in the all materials.During processing,grinding force is great and grinding wheel breakage is serious,which have a great impact to the production.Aimed at grinding force of 30CrNiMo8,got the empirical formula of grinding force which is suitable for the conditions of the test by a linear regression analysis on the data from orthogonal test.According to the characteristics of the grinding wheel topography model,a reasonable mathematical model of grinding wheel is established.The grinding mechanism and the contact arc length are analyzed.According to the analysis,the precondition of the simulation is made and the condition of the grinding experiment is made.The change law of the grinding force are obtained.The experimental data and the simulation data were compared with the experimental data,and the grinding force experience formula of 30CrNiMo8 steel was obtained.关键词
30CrNiMo8钢/磨削力/砂轮地貌/高速超高速磨削Key words
30CrNiMo8 steel/grinding force/grinding wheel topography/high speed and ultra high speed grinding分类
机械制造引用本文复制引用
牟红平,赵恒华,赵学洋..30CrNiMo8钢高速磨削力研究[J].现代制造工程,2017,(4):86-90,5.
