木材工业2017，Vol.31Issue(3)：49-53,5.DOI:10.19455/j.mcgy.20170311
等离子体改性制备塑膜增强柔性装饰薄木工艺
Manufacturing Technology of Flexible Decorative Veneers Reinforced with Low Density Polyethylene (LDPE) and Treated by Plasma
摘要
Abstract
The authors developed film-reinforced flexible decorative veneers by using low temperature plasma to improve the interface between red oak veneers and low density polyethylene (LDPE) films and then bonded them together by hot-pressing. Hot-pressing temperature was 150℃ and decreased to 120℃ after the treatment for the veneers and LDPE films. Optimal manufacturing parameters for making the flexible decorative veneers were 0.6 MPa pressure, 150 seconds hot-pressing and 4 m/min plasma treating. The treated veneers presented better flexibility, higher peeling strength and transverse tensile strength than controls.关键词
低密度聚乙烯膜/柔性装饰薄木/低温等离子体/剥离强度/横向抗拉强度Key words
low density polyethylene film/flexible decorative veneer/low temperature plasma/peel strength/transverse tensile strength分类
轻工业引用本文复制引用
彭晓瑞,张占宽..等离子体改性制备塑膜增强柔性装饰薄木工艺[J].木材工业,2017,31(3):49-53,5.基金项目
中央级公益性科研院所基本科研业务费专项资金项目"塑膜衬底柔性装饰微薄木制备关键技术研究"(CAFINT2015K02). （CAFINT2015K02）
