棉纺织技术2017，Vol.45Issue(4)：14-17,4.
色织产品低上浆率上浆工艺难点与控制
Sizing Technology Difficulty and Control for Yarn-dyed Woven Fabric with Lower Sizing Percentage
张永林1
作者信息
- 1. 南通唐盛纺织有限公司,江苏南通,226315
- 折叠
摘要
Abstract
The problems and solutions of sizing for yarn-dyed woven products with lower sizing percentage were discussed.The quality indexes for dyed yarn were analyzed.The special sizing requirement and technology design principle of dyed yarn were explained.The sizing technology and weaving effect of four yarn-dyed woven products were taken as examples.It is pointed out that the temperature of size box should not be too high and sizing percentage should not be too big for yarn-dyed woven fabric.The moisture regain of sized yarn should be ensured not less than 6 ％.Reasonably decreasing the sizing percentage is beneficial to improve the flexibility of sized yarn and increase loom efficiency.It is considered that sizing instruction and sizing technology should be set based on fiber characteristics,yarn structure and weaving characteristics to obtain better sizing effect.关键词
色织/原纱质量/浆料配方/上浆率/织物疵点Key words
Yarn-dyed Weaving/Grey Yarn Quality/Sizing Instruction/Sizing Percentage/Fabric Defect分类
轻工纺织引用本文复制引用
张永林..色织产品低上浆率上浆工艺难点与控制[J].棉纺织技术,2017,45(4):14-17,4.
