南京工业大学学报（自然科学版）2017，Vol.39Issue(2)：6-10,5.DOI:10.3969/j.issn.1671-7627.2017.02.002
低温共烧结制备阳极支撑型固体氧化物燃料电池
Low temperature fabrication of anode-supported solid oxide fuel cell by co-fire process
摘要
Abstract
Ball-milling and adding sintering additive were adopted to adjust the sintering shrinkage of anode support in order that the anode-support solid oxide fuel cells (SOFCs) were able to be fabricated by co-sintering at low temperature.Particle size analyzer was used to characterize the effect of ball milling on the particle of the anode powders.Size shrinkage method was used to determine the influence of the different pretreatment of anode powders on the sintering properties.The performance of the single cell was evaluated by electrochemical characterization.Results showed that ball milling using nylon tank with hard liner could effectively decrease the particle size of the anode powders,and improve the sintering performance of the anode support.The open circuit voltage of the single cell co-sintered at low temperature 1 250℃ was above 1.0V tested at 800℃ with humidified H2 as fuel and air as oxidant,which was close to the theoretical value.关键词
固体氧化物燃料电池/低温共烧结/阳极支撑/机械球磨:Fe2O3烧结助剂Key words
solid oxide fuel cell/low temperature co-sintering/anode-supported/mechanical milling/Fe2O3 sintering additive分类
信息技术与安全科学引用本文复制引用
余善成,施楠,王洋,陈涵,郭露村..低温共烧结制备阳极支撑型固体氧化物燃料电池[J].南京工业大学学报（自然科学版）,2017,39(2):6-10,5.基金项目
江苏省普通高校研究生科研创新计划(CXLX13_407) （CXLX13_407）
江苏高校优势学科建设工程 （）
