山东科学2017，Vol.30Issue(2)：50-54,5.DOI:10.3976/j.issn.1002-4026.2017.02.008
汽车板用钢Si含量控制技术研究
The technical study on controlling Si content in car plate steel
修大鹏 1倪晓青 2张新恩1
作者信息
- 1. 山东省科学院新材料研究所,山东济南250014
- 2. 山东钢铁股份有限公司,山东济南250100
- 折叠
摘要
Abstract
Directed against the performance degradation problem of domestic car plate steel due to increasing Si in molten steel during the smelting process,in this paper,the changes in the production of Si content in each smelting stage were studied.The influence factors of the molten steel raising Si mainly include slag basicity,and aluminum content in molten steel,tundish slag and tundish insulation material,etc.By the measures of choosing deoxidizer with Si content less than 1.5％,improving slag basicity by using the modification agent,and adopting alkali tundish,the mass fraction of molten steel increasing Si was controlled below 0.01％ during the refining and continuous casting process.关键词
Si含量/真空脱碳/渣碱度Key words
Si content/vacuum decarburization/slag basicity分类
矿业与冶金引用本文复制引用
修大鹏,倪晓青,张新恩..汽车板用钢Si含量控制技术研究[J].山东科学,2017,30(2):50-54,5.
